Pretreatment standards for new sources.

§ 421.336 Pretreatment standards for new sources.

Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources. The mass of wastewater pollutants in primary zirconium and hafnium process wastewater introduced into a POTW shall not exceed the following values:

(a) Sand drying wet air pollution control.

PSNS for the Primary Zirconium and Hafnium Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average
mg/kg (pounds per million pounds) of zirconium dioxide and hafnium dioxide produced
Chromium (total)0.2100.085
Cyanide (total)0.1140.045
Lead0.1590.074
Nickel0.3120.210
Ammonia (as N)75.71033.280

(b) Sand chlorination off-gas wet air pollution control.

PSNS for the Primary Zirconium and Hafnium Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average
mg/kg (pounds per million pounds) of zirconium dioxide and hafnium dioxide produced
Chromium (total)16.0806.521
Cyanide (total)8.6903.478
Lead12.1705.651
Nickel23.91016.080
Ammonia (as N)5,795.0002,547.000

(c) Sand chlorination area vent wet air pollution control.

PSNS for the Primary Zirconium and Hafnium Subcategory

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average
mg/kg (pounds per million pounds) of zirconium dioxide and hafnium dioxide produced
Chromium (total)3.1541.279
Cyanide (total)1.7050.682
Lead2.3871.108
Nickel4.6883.154
Ammonia (as N)1,136.000499.500
This document is only available to subscribers. Please log in or purchase access.