What emission requirements must I meet?

§ 63.2840 What emission requirements must I meet?

For each facility meeting the applicability criteria in § 63.2832, you must comply with either the requirements specified in paragraphs (a) through (d), or the requirements in paragraph (e) of this section. You must also comply with the requirements in paragraph (g) of this section. You must comply with the work practice standard provided in paragraph (h) of this section, if you choose to operate your source under an initial startup period subject to § 63.2850(c)(2) or (d)(2).

(a)

(1) The emission requirements limit the number of gallons of HAP lost per ton of listed oilseeds processed. For each operating month, as defined in § 63.2872, you must calculate a compliance ratio which compares your actual HAP loss to your allowable HAP loss for the previous 12 operating months as shown in Equation 1 of this section. Equation 1 of this section follows:

er12ap01.001.gif

(2) Equation 1 of this section can also be expressed as a function of total solvent loss as shown in Equation 2 of this section. Equation 2 of this section follows:

er12ap01.002.gif

Where:

f = The weighted average volume fraction of HAP in solvent received during the previous 12 operating months, as determined in § 63.2854, dimensionless. 0.64 = The average volume fraction of HAP in solvent in the baseline performance data, dimensionless. Actual Solvent Loss = Gallons of actual solvent loss during previous 12 operating months, as determined in § 63.2853. Oilseed = Tons of each oilseed type “i” processed during the previous 12 operating months, as shown in § 63.2855. SLF = The corresponding solvent loss factor (gal/ton) for oilseed “i” listed in Table 1 of this section, as follows:

Table 1 of § 63.2840—Oilseed Solvent Loss Factors for Determining Allowable HAP Loss

Type of oilseed process A source that... Oilseed solvent loss factor (gal/ton)
Existing sources New sources
(i) Corn Germ, Wet Millingprocesses corn germ that has been separated from other corn components using a “wet” process of centrifuging a slurry steeped in a dilute sulfurous acid solution0.40.3
(ii) Corn Germ, Dry Millingprocesses corn germ that has been separated from the other corn components using a “dry” process of mechanical chafing and air sifting0.70.7
(iii) Cottonseed, Largeprocesses 120,000 tons or more of a combination of cottonseed and other listed oilseeds during all normal operating periods in a 12 operating month period0.50.4
(iv) Cottonseed, Smallprocesses less than 120,000 tons of a combination of cottonseed and other listed oilseeds during all normal operating periods in a 12 operating month period0.70.4
(v) Flaxprocesses flax0.60.6
(vi) Peanutsprocesses peanuts1.20.7
(vii) Rapeseedprocesses rapeseed0.70.3
(viii) Safflowerprocesses safflower0.70.7
(ix) Soybean, Conventionaluses a conventional style desolventizer to produce crude soybean oil products and soybean animal feed products0.20.2
(x) Soybean, Specialtyuses a special style desolventizer to produce soybean meal products for human and animal consumption1.71.5
(xi) Soybean, Combination Plant with Low Specialty Productionprocesses soybeans in both specialty and conventional desolventizers and the quantity of soybeans processed in specialty desolventizers during normal operating periods is less than 3.3 percent of total soybeans processed during all normal operating periods in a 12 operating month period. The corresponding solvent loss factor is an overall value and applies to the total quantity of soybeans processed.0.250.25
(xii) Sunflowerprocesses sunflower0.40.3
This document is only available to subscribers. Please log in or purchase access.