§ 63.1208 What are the test methods?
(a) [Reserved]
(b) Test methods. You must use the following test methods to determine compliance with the emissions standards of this subpart:
(1) Dioxins and furans. (i) To determine compliance with the emission standard for dioxins and furans, you must use:
(A) Method 0023A, Sampling Method for Polychlorinated Dibenzo-p-Dioxins and Polychlorinated Dibenzofurans emissions from Stationary Sources, EPA Publication SW–846 (incorporated by reference—see § 63.14); or
(B) Method 23, provided in Appendix A, Part 60 of this chapter.
(ii) You must sample for a minimum of three hours, and you must collect a minimum sample volume of 2.5 dscm.
(iii) You may assume that nondetects are present at zero concentration.
(2) Mercury. You must use Method 29, provided in appendix A, part 60 of this chapter, to demonstrate compliance with emission standard for mercury.
(3) Cadmium and lead. You must use Method 29, provided in appendix A, part 60 of this chapter, to determine compliance with the emission standard for cadmium and lead (combined).
(4) Arsenic, beryllium, and chromium. You must use Method 29, provided in appendix A, part 60 of this chapter, to determine compliance with the emission standard for arsenic, beryllium, and chromium (combined).