§ 60.392a Standards for volatile organic compounds.
You must comply with the requirements in paragraphs (a) through (h) of this section.
(a) Emission limitations. On and after the date on which the initial performance test required by § 60.8 is completed, you must not discharge or cause the discharge into the atmosphere from any affected facility VOC emissions in excess of the limits in paragraph (a)(1) through (4) of this section. The emission limitations listed in this paragraph (a) of this section shall apply at all times, including periods of startup, shutdown and malfunction. As provided in § 60.11(f), this provision supersedes the exemptions for periods of startup, shutdown and malfunction in the part 60 general provisions in subpart A to this part.
(1) For each EDP prime coat operation:
(i) 0.027 kilogram of VOC per liter of applied coating solids when RT is 0.16 or greater.
(ii) 0.027 × 350(0.160−RT) kg of VOC per liter of applied coating solids when RT is greater than or equal to 0.040 and less than 0.160.
(iii) When RT is less than 0.040, there is no emission limit.
(2) 0.027 kilograms of VOC per liter of applied coating solids (0.23 pounds per gallon of applied coating solids) from each non-EDP prime coat operation.
(3) 0.35 kilograms of VOC per liter of applied coating solids (2.92 pounds per gallon of applied coating solids) from each guide coat operation.
(4) 0.42 kilograms of VOC per liter of applied coating solids (3.53 pounds per gallon of applied coating solids) from each topcoat operation.
(b) Work practices for storage, mixing, and conveying. You must develop and implement a work practice plan to minimize VOC emissions from the storage, mixing, and conveying of coatings, thinners, and cleaning materials used in, and waste materials generated by, all coating operations for which emission limits are established under § 60.392a(a). The plan must specify practices and procedures to ensure that, at a minimum, the elements specified in paragraphs (b)(1) through (5) of this section are implemented.