Don't show this message again
§ 435.45 Standards of performance for new sources (NSPS).
Any new source subject to this subpart must achieve the following new source performance standards (NSPS):
NSPS Effluent Limitations
Stream | Pollutant parameter | NSPS effluent limitations |
---|---|---|
Produced Water: | ||
(A) All coastal areas except Cook Inlet | No discharge. | |
(B) Cook Inlet | Oil & Grease | The maximum for any one day shall not exceed 42 mg/l, and the 30-day average shall not exceed 29 mg/l. |
Drilling Fluids, Drill Cuttings, and Dewatering Effluent: 1 | ||
(A) All coastal areas except Cook Inlet | No discharge. | |
(B) Cook Inlet: | ||
Water-based drilling fluids, drill cuttings, and dewatering effluent | SPP Toxicity | Minimum 96-hour LC50. of the SPP Toxicity Test 4 shall be 3% by volume. |
Free oil | No discharge. 2 | |
Diesel oil | No discharge. | |
Mercury | 1 mg/kg dry weight maximum in the stock barite. | |
Cadmium | 3 mg/kg dry weight maximum in the stock barite. | |
Non-aqueous drilling fluids and dewatering effluent | No discharge. | |
Drill cuttings associated with non-aqueous drilling fluids | No discharge. 5 | |
Well Treatment, Workover and Completion Fluids: | ||
(A) All coastal areas except Cook Inlet | No discharge. | |
(B) Cook Inlet | Oil & Grease | The maximum for any one day shall not exceed 42 mg/l, and the 30-day average shall not exceed 29 mg/l. |
Produced Sand | No discharge. | |
Deck Drainage | Free Oil 3 | No discharge. |
Sanitary Waste | ||
Sanitary M10 | Residual Chlorine | Minimum of 1 mg/l and maintained as close to this concentration as possible. |
Sanitary M9IM | Floating Solids | No discharge. |
Domestic Waste | Floating Solids, Garbage and Foam | No discharge of floating solids or garbage or foam. |