Don't show this message again
§ 205.160-4 Testing procedures.
(a) The manufacturer must conduct one valid test in accordance with the appropriate test procedures specified in Appendix I, on each vehicle selected for testing under this subpart.
40 C.F.R. § 205.160-4
Testing procedures.
Navigation
Current through
Source: 45 FR 86708, Dec. 31, 1980, as amended at 47 FR 57721, Dec. 28, 1982
Table of Contents
Subpart D—Motorcycles
- §205.150 Applicability.
- §205.151 Definitions.
- §205.152 Noise emission standards.
- §205.153 Engine displacement.
- §205.154 Consideration of alternative test procedures.
- §205.155 Motorcycle class and manufacturer abbreviation.
- §205.156 [Reserved]
- §205.157 Requirements.
- §205.157-1 General requirements.
- §205.157-2 Compliance with standards.
- §205.157-3 Configuration identification.
- §205.158 Labeling requirements.
- §205.159 Testing by the Administrator.
- §205.160 Selective enforcement auditing (SEA) requirements.
- §205.160-1 Test request.
- §205.160-2 Test sample selection and preparation.
- §205.160-3 [Reserved]
- §205.160-4 Testing procedures.
- §205.160-5 Reporting of the test results.
- §205.160-6 Passing or failing under SEA.
- §205.160-7 Continued testing.
- §205.160-8 Prohibition of distribution in commerce; manufacturer's remedy.
- §205.162 In-use requirements.
- §205.162-1 Warranty.
- §205.162-2 Tampering.
- §205.162-3 Instructions for maintenance, use, and repair.
- §205.163 Recall of noncomplying motorcycles; relabeling of mislabeled motorcycles.