§ 464.14 New source performance standards.
Any new source subject to this subpart must achieve the following new source performance standards (NSPS), except that non-continuous dischargers shall not be subject to the maximum day and maximum for monthly average mass (kg/1,000 kkg or lb/million lb of metal poured; kg/62.3 million Sm or lb/billion SCF of air scrubbed) effluent standards for copper, lead, zinc, total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass standards and maximum day and maximum for monthly average concentration (mg/l) standards shall apply. Concentration standards and annual average mass standards shall only apply to non-continuous dischargers.
(a) Casting Cleaning Operations.
NSPS
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average |
---|---|---|
kg/1,000 kkg (pounds per million pounds) of metal poured | ||
Copper (T) | 0.0771 | 0.0421 |
Lead (T) | 0.0791 | 0.039 |
Zinc (T) | 0.114 | 0.0431 |
Oil and grease | 3.0 | 1.0 |
TSS | 3.8 | 1.5 |
pH | ( 1) | ( 1) |
1 Within the range of 7.0 to 10.0 at all times.
Maximum for any 1 day | Maximum for monthly average | Annual average 1 | |
---|---|---|---|
(mg/l) 2 | (mg/l) 2 | ||
Copper (T) | 0.77 | 0.42 | 0.017 |
Lead (T) | 0.79 | 0.39 | 0.022 |
Zinc (T) | 1.14 | 0.43 | 0.027 |
Oil and grease | 30 | 10 | 0.501 |
TSS | 38 | 15 | 1.0 |
pH | ( 3) | ( 3) | ( 3) |
1 kg/1,000 kkg (pounds per million pounds) of metal poured.
2 These concentrations must be multiplied by the ratio of (12/x) where x is the actual normalized process wastewater flow (in gallons per 1,000 pounds of metal poured) for a specific plant.