View Source

40 C.F.R. § 471.51

Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).

§ 471.51 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT).

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations for the process operations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT):

(a) Rolling spent neat oils and graphite based lubricants—subpart E—BPT. There shall be no discharge of process wastewater pollutants.

(b) Rolling spent emulsions.

Subpart E—BPT

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average
mg/off-kg (pounds per million off-pounds) of refractory metals rolled with emulsions
Copper0.8150.429
Nickel0.8240.545
Fluoride25.511.3
Molybdenum2.841.47
Oil and grease8.585.15
TSS17.68.37
pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(c) Drawing spent lubricants—subpart E—BPT. There shall be no discharge of process wastewater pollutants.

(d) Extrusion spent lubricants—subpart E—BPT. There shall be no discharge of process wastewater pollutants.

(e) Extrusion press hydraulic fluid leakage.

Subpart E—BPT

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average
mg/off-kg (pounds per million off-pounds) of refractory metals extruded
Copper2.261.19
Nickel2.291.51
Fluoride70.831.4
Molybdenum7.874.07
Oil and grease23.814.3
TSS48.823.2
pH( 1)( 1)

1 Within the range of 7.5 to 10.0 at all times.

(f) Forging spent lubricants—subpart E—BPT. There shall be no discharge of process wastewater pollutants.

(g) Forging contact cooling water.

Subpart E—BPT

Pollutant or pollutant property Maximum for any 1 day Maximum for monthly average
mg/off-kg (pounds per million off-pounds) of forged refractory metals cooled with water
Copper0.6140.323
Nickel0.6200.410
Fluoride19.28.53
Molybdenum2.141.11
Oil and grease6.463.88
TSS13.36.30
pH( 1)( 1)
This document is only available to subscribers. Please log in or purchase access.
Purchase Login

About SCCE

The Society of Corporate Compliance and Ethics (SCCE) is a non-profit, member-based professional association. SCCE supports our members' work with education, news, and discussion forums. We are a community of leaders, defining and shaping the corporate compliance environment across a wide range of industries and geographic regions. In developing and maintaining effective ethics and compliance programs, our members strengthen and protect their companies.

952.933.4977

About HCCA

The Health Care Compliance Association (HCCA), is a 501(c)6 non-profit, member-based professional association. HCCA was established in 1996 and is headquartered in Minneapolis, MN. We provide training, certification, and other resources to over 10,000 members. Our members include compliance officers and staff from a wide range of organizations, including hospitals, research facilities, clinics and technology service providers.

952.988.0141

Facebook X LinkedIn
Copyright © 2024 by Society of Corporate Compliance and Ethics (SCCE) & Health Care Compliance Association (HCCA). No claim to original US Government works. All rights reserved. All information provided through this site, including without limitation all information such as the “look and feel” of the site, data files, graphics, text, photographs, drawings, logos, images, sounds, music, video or audio files on this site, is owned and/or licensed by SCCE & HCCA or its suppliers and is subject to United States and international copyright, trademark and other intellectual property laws. Any third party logos and/or content provided herein is owned by such third parties and is used by permission herein. Your use of this site to is subject to our Terms Of Use and Privacy Statement.
Cookie settings