§ 98.403 Calculating GHG emissions.

(a) LDCs and fractionators shall, for each individual product reported under this part, calculate the estimated CO₂ emissions that would result from the complete combustion or oxidation of the products supplied using either of Calculation Methodology 1 or 2 of this subpart:

(1) Calculation Methodology 1. NGL fractionators shall estimate CO₂ emissions that would result from the complete combustion or oxidation of the product(s) supplied using Equation NN–1 of this section. The annual volume of each NGL product supplied (Fuel_h) shall include any amount of that NGL supplied in a mixture or blend of two or more products listed in Tables NN–1 and NN–2 of this subpart. The annual volume of each NGL product supplied shall exclude any amount of that NGL contained in bulk NGLs exiting the facility (e.g., y-grade, o-grade, and other bulk NGLs). LDCs shall estimate CO₂ emissions that would result from the complete combustion or oxidation of the natural gas received at the city gate (including natural gas that is transported by, but not owned by, the reporter) using Equation NN–1 of this section. For each product, use the default value for higher heating value and CO₂ emission factor in Table NN–1 of this subpart. Alternatively, for each product, a reporter-specific higher heating value and CO₂ emission factor may be used, in place of one or both defaults provided they are developed using methods outlined in § 98.404. For each product, you must use the same volume unit throughout the equation.

(2) Calculation Methodology 2. NGL fractionators shall estimate CO₂ emissions that would result from the complete combustion or oxidation of the product(s) supplied using Equation NN–2 of this section. The annual volume of each NGL product supplied (Fuel_h) shall include any amount of that NGL supplied in a mixture or blend of two or more products listed in Tables NN–1 and NN–2 of this subpart. The annual volume of each NGL product supplied shall exclude any amount of that NGL contained in bulk NGLs exiting the facility (e.g., y-grade, o-grade, and other bulk NGLs). LDCs shall estimate CO₂ emissions that would result from the complete combustion or oxidation of the natural gas received at the city gate (including natural gas that is transported by, but not owned by, the reporter) using Equation NN–2 of this section. For each product, use the default CO₂ emission factor found in Table NN–2 of this subpart. Alternatively, for each product, a reporter-specific CO₂ emission factor may be used in place of the default factor, provided it is developed using methods outlined in § 98.404. For each product, you must use the same volume unit throughout the equation.