Don't show this message again
§ 63.360 Applicability.
(a) All sterilization sources using 1 ton (see definition) in sterilization or fumigation operations are subject to the emissions standards in § 63.362, except as specified in paragraphs (b) through (e) of this section. Owners or operators of sources using 1 ton (see definition) subject to the provisions of this subpart must comply with the requirements of subpart A, of this part according to the applicability of subpart A of this part to such sources in Table 1 of this section.
Table 1 of Section 63.360—General Provisions Applicability to Subpart O
| Reference | Applies to sources using 10 tons in subpart O a | Applies to sources using 1 to 10 tons in subpart O a | Comment |
|---|---|---|---|
| 63.1(a)(1) | Yes | Additional terms defined in § 63.361; when overlap between subparts A and O occurs, subpart O takes precedence. | |
| 63.1(a)(2) | Yes | ||
| 63.1(a)(3) | Yes | ||
| 63.1(a)(4) | Yes | Subpart O clarifies the applicability of each paragraph in subpart A to sources subject to subpart O. | |
| 63.1(a)(5) | No | Reserved. | |
| 63.1(a)(6) | Yes | ||
| 63.1(a)(7) | Yes | ||
| 63.1.1(a)(8) | Yes | ||
| 63.1(a)(9) | No | Reserved. | |
| 63.1(a)(10) | Yes | ||
| 63.1(a)(11) | Yes | § 63.366(a) of subpart O also allows report submissions via fax and on electronic media. | |
| 63.1(a)(12)–(14) | Yes | ||
| 63.1(b)(1)–(2) | Yes | ||
| 63.1(b)(3) | No | § 63.367 clarifies the applicability of recordkeeping requirements for sources that determine they are not subject to the emissions standards. | |
| 63.1(c)(1) | Yes | Subpart O clarifies the applicability of each paragraph in subpart A to sources subject to subpart O in this table. | |
| 63.1(c)(2) | Yes | § 63.360(f) exempts area sources subject to this subpart from the obligation to obtain Title V operating permits. | |
| 63.1(c)(3) | No | Reserved. | |
| 63.1(c)(4) | Yes | ||
| 63.1(c)(5) | No | § 63.360 specifies applicability. | |
| 63.1(c)(6) | Yes | ||
| 63.1(d) | No | Reserved. | |
| 63.1(e) | Yes | ||
| 63.2 | Yes | Additional terms defined in § 63.361; when overlap between subparts A and O occurs, subpart O takes precedence. | |
| 63.3 | Yes | Other units used in subpart O are defined in the text of subpart O. | |
| 63.4(a)(1)–(3) | Yes | ||
| 63.4(a)(4) | No | Reserved. | |
| 63.4(a)(5) | Yes | ||
| 63.4(b) | Yes | ||
| 63.4(c) | Yes | ||
| 63.5(a) | No | § 63.366(b)(1) contains applicability requirements for constructed or reconstructed sources. | |
| 63.5(b)(1) | Yes | No | |
| 63.5(b)(2) | No | Reserved. | |
| 63.5(b)(3) | No | See § 63.366(b)(2). | |
| 63.5(b)(4) | Yes | No | |
| 63.5(b)(5) | Yes | No | |
| 63.5(b)(6) | Yes | No | |
| 63.5(c) | No | Reserved. | |
| 63.5(d)(1)–(2) | No | See § 63.366(b)(3). | |
| 63.5(d)(3)–(4) | Yes | No | |
| 63.5(e) | Yes | No | |
| 63.5(f)(1)–(2) | No | See § 63.366(b)(4). | |
| 63.6(a)(1) | Yes | ||
| 63.6(a)(2) | No | § 63.360 specifies applicability. | |
| 63.6(b)–(c) | No | § 63.360(g) specifies compliance dates for sources. | |
| 63.6(d) | No | Reserved. | |
| 63.6(e) | No | Subpart O does not contain any operation and maintenance plan requirements. | |
| 63.6(f)(1) | No | § 63.362(b) specifies when the standards apply. | |
| 63.6(f)(2)(i) | Yes | ||
| 63.6(f)(2)(ii) | No | § 63.363 specifies parameters for determining compliance. | |
| 63.6(f)(2)(iii)–(iv) | Yes | ||
| 63.6(f)(2)(v) | No | ||
| 63.6(f)(3) | Yes | ||
| 63.6(g) | Yes | ||
| 63.6(h) | No | Subpart O does not contain any opacity or visible emission standards. | |
| 63.6(i)(1)–(14) | Yes | ||
| 63.6(i)(15) | No | Reserved | |
| 63.6(i)(16) | Yes | ||
| 63.6(j) | Yes | ||
| 63.7(a)(1) | Yes | ||
| 63.7(a)(2) | Yes | ||
| 63.7(a)(3) | Yes | ||
| 63.7(b) | Yes | ||
| 63.7(c) | Yes | No | |
| 63.7(d) | Yes | No | |
| 63.7(e) | Yes | § 63.365 also contains test methods specific to sources subject to the emissions standards. | |
| 63.7(f) | Yes | ||
| 63.7(g)(1) | Yes | ||
| 63.7(g)(2) | No | Reserved | |
| 63.7(g)(3) | Yes | ||
| 63.7(h) | Yes | ||
| 63.8(a)(1) | Yes | ||
| 63.8(a)(2) | Yes | ||
| 63.8(a)(3) | No | Reserved | |
| 63.8(a)(4) | Yes | ||
| 63.8(b)(1) | Yes | ||
| 63.8(b)(2) | Yes | ||
| 63.8(b)(3) | No | ||
| 63.8(c)(1) (i)–(ii) | No | A startup, shutdown, and malfunction plan is not required for these standards. | |
| 63.8(c)(1)(iii) | Yes | ||
| 63.8(c)(2)–(3) | Yes | ||
| 63.8(c)(4)–(5) | No | Frequency of monitoring measurements is provided in § 63.364; opacity monitors are not required for these standards. | |
| 63.8(c)(6) | No | Performance specifications for gas chromatographs and temperature monitors are contained in § 63.365. | |
| 63.8(c)(7)(i)(A)–(B) | No | Performance specifications for gas chromatographs and temperature monitors are contained in § 63.365. | |
| 63.8(c)(7)(i)(C) | No | Opacity monitors are not required for these standards. | |
| 63.8(c)(7)(ii) | No | Performance specifications for gas chromatographs and temperature monitors are contained in § 63.365. | |
| 63.8(c)(8) | No | ||
| 63.8(d) | Yes | No | |
| 63.8(e)(1) | Yes | ||
| 63.8(e)(2) | Yes | ||
| 63.8(e)(3) | Yes | No | |
| 63.8(e)(4) | Yes | ||
| 63.8(e)(5)(i) | Yes | ||
| 63.8(e)(5)(ii) | No | Opacity monitors are not required for these standards. | |
| 63.8(f)(1)–(5) | Yes | ||
| 63.8(f)(6) | No | ||
| 63.8(g)(1) | Yes | ||
| 63.8(g)(2) | No | ||
| 63.8(g)(3)–(5) | Yes | ||
| 63.9(a) | Yes | ||
| 63.9(b)(1)–(i) | Yes | ||
| 63.9(b)(1)(ii)–(iii) | No | § 63.366(c)(1)(i) contains language for sources that increase usage such that the source becomes subject to the emissions standards. | |
| 63.9(b)(2)–(3) | Yes | § 63.366(c)(3) contains additional information to be included in the initial report for existing and new sources. | |
| 63.9(b)(4)–(5) | No | § 63.366(c)(1)(ii) and (iii) contains requirements for new or reconstructed sources subject to the emissions standards. | |
| 63.9(c) | Yes | ||
| 63.9(d) | No | ||
| 63.9(e) | Yes | ||
| 63.9(f) | No | Opacity monitors are not required for these standards. | |
| 63.9(g)(1) | Yes | ||
| 63.9(g)(2)–(3) | No | Opacity monitors and relative accuracy testing are not required for these standards. | |
| 63.9(h)(1)–(3) | Yes | ||
| 63.9(h)(4) | No | Reserved. | |
| 63.9(h)(5) | No | § 63.366(c)(2) instructs sources to submit actual data. | |
| 63.9(h)(6) | Yes | ||
| 63.9(i) | Yes | ||
| 63.9(j) | Yes | ||
| 63.9(k) | Yes | Only as specified in § 63.9(j). | |
| 63.10(a) | Yes | ||
| 63.10(b)(1) | Yes | ||
| 63.10(b)(2)(i) | No | Not applicable due to batch nature of the industry. | |
| 63.10(b)(2)(ii) | Yes | ||
| 63.10(b)(2)(iii) | No | ||
| 63.10(b)(2)(iv)–(v) | No | A startup, shutdown, and malfunction plan is not required for these standards. | |
| 63.10(b)(2)(vi)–(xii) | Yes | ||
| 63.10(b)(2)(xiii) | No | ||
| 63.10(b)(2)(xiv) | Yes | ||
| 63.10(b)(3) | No | § 63.367 (b) and (c) contains applicability determination requirements. | |
| 63.10(c)(1) | Yes | ||
| 63.10(c)(2)–(4) | No | Reserved. | |
| 63.10(c)(5) | Yes | ||
| 63.10(c)(6) | No | ||
| 63.10(c)(7) | No | Not applicable due to batch nature of the industry. | |
| 63.10(c)(8) | Yes | ||
| 63.10(c)(9) | No | ||
| 63.10(c)(10)–(13) | Yes | ||
| 63.10(c)(14) | Yes | No | |
| 63.10(c)(15) | No | A startup, shutdown, and malfunction plan is not required for these standards. | |
| 63.10(d)(1) | Yes | ||
| 63.10(d)(2) | Yes | ||
| 63.10(d)(3) | No | Subpart O does not contain opacity or visible emissions standards. | |
| 63.10(d)(4) | Yes | ||
| 63.10(d)(5) | No | A startup, shutdown, and malfunction plan is not required for these standards. | |
| 63.10(e)(1) | Yes | ||
| 63.10(e)(2)(i) | Yes | ||
| 63.10(e)(2)(ii) | No | Opacity monitors are not required for these standards. | |
| 63.10(e)(3)(i)–(iv) | Yes | ||
| 63.10(e)(3)(v) | No | § 63.366(a)(3) specifies contents and submittal dates for excess emissions and monitoring system performance reports. | |
| 63.10(e)(3)(vi)–(viii) | Yes | ||
| 63.10(e)(4) | No | Opacity monitors are not required for these standards. | |
| 63.10(f) | Yes | ||
| 63.11 | Yes | ||
| 63.12–63.15 | Yes | ||