§ 49.162 Air quality permit by rule for new or modified true minor source auto body repair and miscellaneous surface coating operations in Indian country.

(a) Abbreviations and acronyms:

(b) Definitions for the purposes of this permit by rule—(1) Adhesion promoter means a coating, which is labeled and formulated to be applied to uncoated plastic surfaces to facilitate bonding of subsequent coatings, and on which, a subsequent coating is applied.

(2) Airless and air-assisted airless spray mean any paint spray technology that relies solely on the fluid pressure of the paint to create an atomized paint spray pattern and does not apply any atomizing compressed air to the paint before it leaves the paint nozzle. Air-assisted airless spray uses compressed air to shape and distribute the fan of atomized paint, but still uses fluid pressure to create the atomized paint.

(3) Cause means with respect to the reviewing authority's ability to terminate a permitted source's coverage under a permit by rule that:

(i) The permittee is not in compliance with the provisions of this permit by rule;

(ii) The reviewing authority determines that the emissions resulting from the construction or modification of the permitted source significantly contribute to NAAQS violations, which are not adequately addressed by the requirements in this permit by rule;

(iii) The reviewing authority has reason to believe that the permittee obtained coverage under the permit by rule by fraud or misrepresentation; or

(iv) The permittee failed to disclose a material fact required by the Notification of Coverage or the requirements applicable to the permitted source of which the applicant had or should have had knowledge at the time the permittee submitted the Notification of Coverage.

(4) Clear coating means any coating that contains no pigments and is labeled and formulated for application over a color coating or clear coating.

(5) Cold cleaning solvent makeup means the gallons of gross cold cleaning solvent usage minus the gallons of solvent disposed of as waste solvent.

(6) Construction means any physical change or change in the method of operation including fabrication, erection, installation, demolition, or modification of an affected emissions unit that would result in a change of emissions.

(7) Color coating means any pigmented coating, excluding adhesion promoters, primers, and multi-color coatings, that requires a subsequent clear coating and which is applied over a primer or adhesion promoter. Color coatings include metallic/iridescent color coatings.

(8) Electrostatic application means any method of coating application where an electrostatic attraction is created between the part to be coated and the atomized paint particles.

(9) Freeboard area means the air space in a batch-loaded cold cleaner that extends from the liquid surface to the top of the tank.

(10) Freeboard height means the distance from the top of the solvent to the top of the tank for batch-loaded cold cleaners.

(11) Freeboard ratio means the ratio of the solvent cleaning machine freeboard height to the smaller interior dimension (length, width, or diameter) of the solvent cleaning machine.

(12) Halogenated Hazardous Air Pollutant (HAP) solvent means methylene chloride (CAS No. 75–09–2), perchloroethylene (CAS No. 127–18–4), trichloroethylene (CAS No. 79–01–6), 1,1,1-trichloroethane (CAS No. 71–55–6), carbon tetrachloride (CAS No. 56–23–5), and/or chloroform (CAS No. 67–66–3).

(13) High-volume, low-pressure (HVLP) spray equipment means spray equipment that is permanently labeled as such and used to apply any coating by means of a spray gun which is designed and operated between 0.1 and 10 pounds per square inch gauge (psig) air atomizing pressure measured dynamically at the center of the air cap and at the air horns.

(14) Liquid leak means a VOC-containing liquid leak from the degreaser at a rate of three drops per minute or more or any visible liquid mist.

(15) Multi-color coating means any coating that exhibits more than one color in the dried film after a single application, is packaged in a single container, and hides surface defects on areas of heavy use, and which is applied over a primer or adhesion promoter.

(16) Notification of Coverage means the permit notification that contains all the information required in the standard notification form for this permit by rule.

(17) One-component coating means a coating that is ready for application as it comes out of its container to form an acceptable dry film. A thinner necessary to reduce the viscosity is not considered a component.

(18) Permittee means the owner or operator of a permitted source.

(19) Permitted source means each auto body repair and miscellaneous surface coating operation for which a source submits a complete Notification of Coverage.

(20) Pretreatment coating means any coating that contains a minimum of one-half (0.5) percent acid by weight and not more than 16 percent solids by weight necessary to provide surface etching and is labeled and formulated for application directly to bare metal surfaces to provide corrosion resistance and adhesion.

(21) Primer means any coating, which is labeled and formulated for application to a substrate to provide:

(i) A bond between the substrate and subsequent coats;

(ii) Corrosion resistance;

(iii) A smooth substrate surface; or

(iv) Resistance to penetration of subsequent coats, and on which a subsequent coating is applied.

Primers may be pigmented.

(22) Responsible official means one of the following:

(i) For a corporation: A president, secretary, treasurer, or vice-president of the corporation in charge of a principal business function, or any other person who performs similar policy or decision-making functions for the corporation, or a duly authorized representative of such person if the representative is directly responsible for the overall operation of the permitted source.

(ii) For a partnership or sole proprietorship: A general partner or the proprietor, respectively.

(iii) For a public agency: Either a principal executive officer or ranking elected official, such as a chief executive officer having responsibility for the overall operations of a principal geographic unit of the agency.

(23) Single-stage coating means any pigmented automotive coating, (excluding automotive adhesion promoters, primers and multi-color coatings), specifically labeled and formulated for application without a subsequent clear coating and that are applied over an adhesion promoter, a primer, or a color coating. Single-stage coatings include single-stage metallic/iridescent coatings.

(24) Spray-applied coating operations means coatings that are applied using a hand-held device that creates an atomized mist of coating and deposits the coating on a substrate. For the purposes of this permit by rule, spray-applied coatings do not include the following materials or activities:

(i) Coatings applied from a hand-held device with a paint cup capacity that is equal to or less than 3.0 fluid ounces (89 cc).

(ii) Surface coating application using powder coating, hand-held, non-refillable aerosol containers, or non-atomizing application technology, including, but not limited to, paint brushes, rollers, hand wiping, flow coating, dip coating, electro deposition coating, web coating, coil coating, touch-up markers, or marking pens.

(iii) Thermal spray operations (also known as metalizing, flame spray, plasma arc spray, and electric arc spray, among other names) in which solid metallic or non-metallic material is heated to a molten or semi-molten state and propelled to the work piece or substrate by compressed air or other gas, where a bond is produced upon impact.

(25) Temporary protective coating means any coating which is labeled and formulated for the purpose of temporarily protecting areas from overspray or mechanical damage.

(26) Tire retread adhesive means any adhesive to be applied to the back of pre-cured tread rubber and to the casing and cushion rubber, or to be used to seal buffed tire casings to prevent oxidation while the tire is being prepared for a new tread.

(27) Truck bed liner coating means any coating, excluding color, multi-color, and single stage coatings, labeled and formulated for application to a truck bed to protect it from surface abrasion.

(28) Two-component coating means a coating requiring the addition of a separate reactive resin, commonly known as a catalyst, before application to form an acceptable dry film.

(29) Underbody coating means any coating labeled and formulated for application to wheel wells, the inside of door panels or fenders, the underside of a trunk or hood, or the underside of the motor vehicle.

(30) Uniform finish coating means any coating labeled and formulated for application to the area around a spot repair for the purpose of blending a repaired area's color or clear coat to match the appearance of an adjacent area's existing coating.

(31) Volatile organic compounds or VOC means any compound of carbon, excluding carbon monoxide, carbon dioxide, carbonic acid, metallic carbides or carbonates, and ammonium carbonate, which participates in atmospheric photochemical reactions. This does not include the compounds listed in 40 CFR 51.100(s)(1).

(c) Information about this permit by rule. (1) Applicability. Pursuant to the provisions of the Clean Air Act (CAA), subchapter I, part D and 40 CFR part 49, subpart C, this permit authorizes the construction or modification and the operation of the auto body repair and miscellaneous surface coating operation for which a reviewing authority receives a completed Notification of Coverage (permitted source).